Motherboard maintenance tips

he computer today is no longer a need for people dispossessed but rather the basic needs that must exist in particular for all types of business. Sure there are many also who have not used the computer alias computer manuals (engine type) as a tool for typing.

Imagine in the past that have not been so familiar computer, in case of power failure, then the office staff could still work using the makeshift lighting candles because at that time kompunter still rare, compared to today, when the power goes out then all the employees that complete rest because the average in every field of endeavor has been to use computer facilities as a basic working tool, while the computer power required to form an electric current flow in case of power failure so we certainly can not do anything but waited until the electrical re-energized.

This electrical problem could affect the safety of our computer machine tools one of which is the motherboard or mainboard.

The motherboard or mainboard is very important for the smooth process of the data for all components ranging from the processor, memory, data storage media (storage), a component of Input-Output (I / O) cards (cards) stuck on this mainboard.

In order for this mainboard can be longer or durable in usage it is necessary to consider the following quick tips:

1.     Use the Uninterruptible Power Supply (UPS) and power supply voltage stavolt as a safety so that no influence on the performance of the mainboard when the voltage changes abruptly. 
2.     Note the cleanliness of the inside of the particular CPU mainboard, mainboard do the cleaning when soiled using an air compressor or can be by using brush approximately 3 months or as needed. 
3.     Existing air vents in the casing should not be closed so as to accelerate the exchange of free air into the room Central Processing Unit (CPU) in order to maintain the temperature in the CPU space. 
4.     Clean slots or konetor that connects the mainboard with the other components of the dust once a month. 
5.     When cleaning in order to always pay attention to whether or not the bolts that remains in the mainboard, if there is immediate lift from place to avoid a short circuit (shorting). 
6.     Do not let the computer is not used / not turned on for a long period of time. Try at least 3 times used / turned in a week. 

So little tips on caring for the mainboard as well as answers to the questions asked a visitor of this blog to learn computer science.

How to make printer Cartrige durable

Perhaps you have and often experiencing a like ink often injected and then the longer the shorter the life of the ink, but you do not know what causes it.The longer these events are increasingly making the ink age inside cartrige getting shorter so that makes us more often injecting ink into the cartrige. This is caused by several things, among which are:

•     Too frequent injecting ink into the cartrige
•     Moisture on the head cartrige not terjada
•     Experiencing leaks in cartrige thus making the ink dry faster in cartrige

To make cartrige more durable and longer lasting here I try to give some tips as follows:

1.     Not too often do the injecting ink into the cartrige, try to not more than 3 times the injection
2.     Always keep the moisture in the head cartrige, the point is if cartrige release from the printer, cover the head / head cover cartrige with cotton or obtained at the time of purchase so that moisture is maintained so that the head does not experience drought which eventually became clogged ink nozzles during printing
3.     In the process of injecting ink into the cartrige certainly have to break the seal closing the hole injection, after which it must close the back aperture of injectable tightly so it does not happen in the cartrige drying. In case of drying the existing space in the cartrige as a placeholder where the ink will be smaller, maybe you've had time to do the injection, only a few milli cartrigenya ink alone is full, it's because some of the contents of cartrige is the ink dry.
4.     If need to do manually on the head cartrige heating with hot water, how to pour water in a container mendidi flat, then point the head cartrige into hot water and try not touch the water surface is colored yellow sircuit.

These tips I learned from my own experience during use deskjet printer, for the loyal blog visitors who want to study computer science tips to add please post via the comments field. Good luck ...