Optimize Broadband & Dsl Connections and increase your internet speed

These settings allow you to boost the speed of your broadband Internet connection when using a Cable Modem or DSL Router with Windows 2000 and Windows XP.

Open your registry and find the key below.

Create the following DWORD values, as most of these values will not already exist you will need to create them by clicking on ‘Edit -> New -> DWORD Value’ and then set the value as shown below.

DefaultTTL = “80″ hex (or 128 decimal)
Specifies the default time to live (TTL) for TCP/IP packets. The default is 32.

EnablePMTUBHDetect = “0″
Specifies whether the stack will attempt to detect Maximum Transmission Unit (MTU) routers that do not send back ICMP fragmentation-needed messages. The default is 0.

EnablePMTUDiscovery = “1″
Specifies whether the TCP/IP stack will attempt to perform path MTU discovery as specified in RFC 1191. The default is 1.

GlobalMaxTcpWindowSize = “7FFF” hex (or 32767 decimal)
Specifies the system maximum receive window size advertised by the TCP/IP stack.

TcpMaxDupAcks = “2″
Determines the number of duplicate ACKs that must be received for the same sequence number of sent data before “fast retransmit” is triggered.

SackOpts = “1″
Enables support for selective acknowledgements as documented by Request for Comment (RFC) 2018. Default is 0.

Tcp1323Opts = “1″
Controls RFC 1323 time stamps and window scaling options. Possible values are: “0″ = disable RFC 1323 options, “1″ = window scale enabled only, “2″ = time stamps enabled only and “3″ = both options enabled.

TcpWindowSize = “7FFF” hex (or 32767 decimal)
Specifies the receive window size advertised by the TCP/IP stack. If you have a latent network you can try increasing the value to 93440, 186880, or 372300.

Exit your registry and restart Windows for the changes to take effect.

If you don’t want to edit the registry, here’s a little TCP utility that is ideal…

http://www.broadbandreports.com/front/doctorping.zip
FOR MORE , VISIT HERE: WWW.FREEINTERNETTRICK.CO.CC

Make Unlimited Free PC to Mobile Calls Anywhere In The World

Free calls, this is one of the most searched keyword on internet and most end up in you paying some amount to the service to use it and finally believe that nothing in the world comes for free. But here is your pick for free calls all around the globe. This service can be used to call any where in the world but all calls can last only seven minutes. There is no restriction on the number of calls made so that makes it unlimited service.

All you should have is a Yahoo Messenger recommended to be latest, headphone with mic and internet connection (Broadband or DSL recommended).

How to make unlimited calls from PC to Mobile anywhere in the world for free?

Step 1: Install Latest Yahoo Messenger on your PC. Make sure that your messenger is Yahoo Messenger with Voice.

Step 2: Sign up to your Yahoo Messenger once successfully installed. Make sure your headphone and mic is connected to the PC and properly configured. If you have any problem in this click here.

Step 3: In Yahoo Messenger dial +18003733411 and Press Enter.

Step 4: A new window pops out and an automated voice response greets you to the FREECALL service. This service is providing free call facility in return of hearing their voice advertisements. As guided by the voice assistant you finally hear a menu where you will asked to say “FREE CALL” to select the free call option. Make sure you tell FREE CALL loudly and clearly as it may prompt you for multiple attempts of input if it could not make out what you said.

Step 5: After the voice advertisement is finished playing you will prompted to enter the phone number prefixed with the country code first (91 for India). Once this message is finished dial your number with the country code on the number pad that can be obtained by clicking the button located in the left side of the hold button(circled in the image below).

Step 6: DONE! That your free telephone configured on you PC, the call will get disconnected after 7 minutes. You can connect to same or different number any number of times and that makes it truly UNLIMITED. If you happen to hear a message that all lines are busy then do try after sometime.

TIP: You can also try Skype as it provides free calls to toll free numbers in US. Dial the same number and do as above.

USING BITVISE TO CREATE AN SSH WINDOWS

This is from an email I sent to some people I worked with in the past. Many of them use an ssh tunnel to connect to their Windows Desktop, which is sometimes hard for people to get all the steps correct, since the common way they accomplished it was using Plink from the PuTTY suite and using the command line to create the tunnel, then using Remote Desktop (RDP) to connect to the Windows desktop through the tunnel. Here is what I wrote them:

I took a look at Tunnelier and it actually looks pretty nice and not too hard to setup.

After installing and launching, here is how I configured it to Remote Desktop into lajolla. To Remote Desktop to your computer, you would use your computers IP address instead of lajolla’s (172.16.4.13)

Login setup: added host and username

Options: Unchecked SFTP (which is like WinSCP and checked Remote Desktop)

Terminal: Change Target Host to 172.16.4.13 (or your desktop IP)

When you log in, you get a prompt,

and Remote Desktop opens up automatically.

You can save the profile, then launch it just by double clicking the shortcut and the profile loads automatically, then click on login, and you are set. Much more GUI (graphical user interface) of a way to tunnel, then PuTTY, which may be good to some. It also saves steps once set up, as it automatically launches Remote Desktop. Interesting find.

TRICK OF INDOSAT WITH YOUR-FREEDOM

condition:
- Download YF in http://www.your-freedom.net/
- Do not forget to REGISTER as well (karna username and password will be used)
tutorial YF:
Internet profiles 1.bkin okay APN: satm * eng * s (kl can pake hape pcsuite from)
YF 2.buka entrance to the "Ports" port = 1234 fill in a web proxy, kemdudian in check
3.kembali to the "status" go to "Configure" fill:
- Address: mmsc.indosat.com: ems21.your-443/cgi-bin/legacy.cgi @ freedom.de
- Port: 443
- Connection Mode: HTTPS
4.isikan YF username and password in the "Account Information"
5.isikan the "Proxy Settings"
- Proxy address: 10.19.19.19
- Port: 8080
then save & exit
6.dial-up used the internet pake yg udah profile created at no.1, and the YF-click "Start Connenction"
Note the picture on the YF door on the right, wait until the door opened
7.set in the browser proxy: 127.0.0.1 port: 1234
8.selamat was browsing ria