Looking for someone in google

Usually where you look for someone on the internet? On Google or on social networking sites? Some social networking sites require that you login whenever you want to find someone. If you use Google, can millions of people with the same name appear in search results if we just type the name.

Then, how to be more specific? Here's how.

Go to Google and type with a format like this: intitle: "name search" site: sitename. For example, intitle: "Sudarma Sopian" site: facebook.com. Press enter.









The result is like this.









Try on other sites.

intitle: "Robert Jason" site: profiles.friendster.com

intitle: "Robert Jason" site: hi5.com

intitle: "Robert Jason" site: myspace.com

intitle: "Robert Jason" site: twitter.com

intitle: "Robert Jason" site: koprol.com

intitle: "Robert Jason" site: fupei.com


Source : http://www.sudarma.info

Accessing Yahoo! Mail from Outlook Express / Thunderbird with YPOPs

Unlike Gmail, and some other free email providers that enables us to access email via mail client, Yahoo! Mail service does not provide this feature. Access via POP on Yahoo! email service is offered commercially. As a way out, try using the tool YPOPs!. Download YPOPs!, Then install them onto your computer.

After that, do the addition of an account on your mail client program. For example, here's how to add Yahoo! Mail account in Outlook Express.

1. In Outlook Express, click Tools menu> Accounts.
2. Click the Add> Mail.
3. Type in your name, then click Next.
4. Type Yahoo! email address, and then click Next.
5. Make sure the option My incoming mail server is POP3. Enter 127.0.0.1 in the box Incoming (POP3, IMAP or HTTP) server and Outgoing mail (SMTP) mail server. Click Next.
6. Like when logged into Yahoo! Mail via the web, type the ID Yahoo! you on Account name:, and your password in the Password:. Click Next.
7. Click Finish. Internet Accounts dialog box will be displayed again with an additional account named 127.0.0.1.
8. Click the new account, then click the Properties button.
9. Change the name of the account into YPOPs or other names that you will remember.
10. Click the Servers tab, and activate the checkbox My server requires authentication.
11. Click the Advanced tab, then drag the Server timeouts value to 5 minutes (maximum).
12. If you want the email messages in Yahoo! not be removed once downloaded, activate the checkbox Leave a copy of messages on server. If not, then your email server Yahoo! will be deleted after you have copied to Outlook Express (local computer). Click OK.
13. Click Close.
14. Now you have to manage email Yahoo! such as managing any other POP email. Click the Send / Recv to pull the email from Yahoo and the server sends you an email draft.

The settingYPOPs! at Thunderbird more or less the same, except on the charging POP / Incoming Server, type localhost, not 127.0.0.1. The value of its fixed 127.0.0.1 SMTP.

Advantages and Disadvantages of Dofollow Blog

Currently, dofollow is a familiar word with us, especially for bloggers who like hunting backlinks by commenting. There are many who hesitate to make their blogs dofollow because of several factors, such as fear rank unrivaled by other bloggers, or fear its pagerank in circumcision by Om Google. I myself can not comment on this one because I did not Google employees. Some time ago, Blogger has made the entire Blogspot-based blog be no follow because of the technique to create links in comments become DoFollow be easy, maybe in between we've been practicing them. But in this post I will try to review some of the advantages and disadvantages of dofollow blogs.


Advantages:

1. Get double the traffic increase, especially if you WordPress users and uses KeywordLuv plugin, you will get traffic from search engines within a decent amount

2. Got comments doubled, to know yourself is why:)

3. Usually there will be many visitors to loyal (loyal readers) who always visit our blog

4. The number of feed subscribers increased drastically, because customers want to always follow your blog updates

5. Blogs are becoming increasingly popular blog, if you previously have been popular with the state of no follow.

6. Get stable traffic though rarely updated blog

7. Appreciating the commentators who actually bothered to comment, so that motivates them to give a better comment


Disadvantages:

1. Many comments that are spam with the sole purpose of getting backlinks only

2. No doubt you will be overwhelmed taking care of many comments (if you are moderating all comments)

3. The opportunity to sell links or advertising is reduced because the advertiser can utilize your blog dofollow.

4. If too many comments (about the above 100), then the search engines to index your blog will be overwhelmed because too many outgoing links.

5. If the backlinks, backlinks are still a theme with your blog, it does not matter, BUT if the blog is far from the theme of your blog (such as selling drugs or anything that is not related to the blog), then maybe the search engines will assume your blog just junk blogs.

6. If you use a self-hosted Wordpress, then maybe you will quickly run out of bandwidth because too many page impressions since the visitors want to leave the backlinks in almost every post.

7. Comments that are less good, in it there are various kinds of links. Even if a weighted commentary, but if too many links will be less good in the eyes of search engines.

So generally Advantages And Disadvantages Dofollow Blogs can be summed up as follows:

1. Benefits for providers obvious comment will get a backlink. This course is an additional point to improve pagerank.

2. Benefits for the blog owner is increasing visitors, increasing traffic, Alexa Rank ranking dropped dramatically .. like this blog, he was only a week with a number of posts are still under 10 .. already reached 2.4 million from 14 million when first made.

3. While people say the losses if any links that enter or exist in your blog / website link is considered legitimate by search engines, could be a blog / website is considered a link farm (livestock Link). So that its PageRank value will go down. True or not I do not know, because the evidence is a lot of PR dofollow blogs is high, many are PR 4 and 5 there is even a PR 6 tuh. Anyway also if true, stay ask yourself .. make a blog that aim to share or want to find a PR?

4. Usually because of the many comments received, the blog owner can not / rarely make a visit back to the blog commentator. but this is understandable because it has provided a backlink as a substitute,,

I have given some examples of advantages and disadvantages of dofollow blogs. Creating dofollow blogs can make a fairly rapid traffic increase, but there are many problems associated with spam. Finally, there remains a decision in your hands, so think carefully.

How to Get Google Sitelinks

If you enter a common word in Google, for example, the website www.microsoft.com microsoft will appear in the first place, and underneath there are about 4 lines that contain the links in the web. It's called Google Sitelinks. Just below it is the second, third, and so on. Cool huh? As if the web is really special. I thought only the big sites get Google Sitelinks. Eh it turns out this blog also gets a gift from Google Sitelinks. Happy ... How do I get it?

Unfortunately, there is no official document from Google that explains in detail for the web or blog we get Sitelinks. Official documents from Google that can be used as a reference is this.

From the results of browsing and reading documents before, there are several factors or a way to get a Google Sitelinks:

1. Must be number one for certain keywords on Google

As far as I see on the Google Search Result, just a site that gets Google Sitelinks, the site ranks first for certain keywords. To get high rankings on search engines can be used SEO techniques, which basically there are 2 techniques, namely:

* Create original article (not copy-paste) quality.
* Pursuing other pages link to that page.

2. In the homepage there is a minimum of 3 pieces link

Citing Google's statement:

Pls sitelinks We only display a site has a minimum of three sitelinks available.

So a web page which contains a flash animation charming and there is only one button to enter or log, can not get sitelinks from Google.

3. The link is clicked many visitors to our site

Citing Google's statement:

We only show sitelinks for results When We think they'll be useful to the user.

The word "useful to the user" I mean that readers who come to our homepage, lots of clicking the link.

4. the words you enter Relevant to visitors of Google

Citing Google's statement:

(If) We do not think That the sitelinks for your site are relevant for the user's query, We will not show Them.

This means the links in sitelink, must be suitable and relevant to the keywords entered visitors.

5. Age site or the number of visitors?

There are references that make it clear that the site should be a minimum age of 2 years to get google sitelinks, that's not true, because my blog is still a baby, just a few months but already get sitelinks. I estimate that Google is also considering the number of end or page view. For the record, unique pageview for this blog (now) is> 3000 per day. Point to-5 is associated with a point to-1. Most likely, the site became the number 1 on Google for keywords that are common will get visitors in abundance.

Recovering Bad Sector on the hard disk

Bad Sector has long been a scourge that is troubling for a number of computer users. Quite a lot of factors that could cause Bad Sector, but not least also a way that can be done to restore the affected hard disk. Some time ago I read an article on one computer tabloid homeland, and the following tips can I rangkumkan specifically for you.

First you need a little know whether Bad Sector Bad Sector and how it could happen. Hard Disk Bad Sector can be affected through two possibilities, the first in Logic, and the second in Physic. For the last possibility, it will not be discussed too deep because of Bad Sector in Physic occur due to physical damage to the hard disk.

While Bad Sector in Logic can occur because of disruption of the operation read - write in a sector. This can be caused by several possibilities, such as viruses, corrupt boot record, the voltage disturbance, or other similar possibilities.
When Bad Sector Logic's happening on your hard disk, it is advisable to first try hard disk repair software is included when buying a hard disk.

The software does not actually fix bad sectors, but hide it. In other words the damage still exists but the operating system will ignore it. About a picture of how it works is like this. The software will restore your hard disk's magnetic orientation to make each byte read and write can do so that enables the hard disk recovery. Bad Sector can be spread on the hard disk, especially on the hard disk track 0. Such an event can also cause you not to install and copy the data on your hard disk.


Use of hard disk repair software

Previously there may be a simple way that can be done as first aid when threatened experiencing hard disk Bad Sector. In Windows XP open them MS-DOS Prompt. Then type "chkdsk / R" and press Enter. This command will immediately find the position of Bad Sector and then do the rescue on that data can still be legible. For the series of Windows 95, 98, or Millennium, Scandisk application which is inherited from the Windows application that can be tried. However, if still not convinced and problems on the hard disk is not resolved, there are other ways that are below maximum.

Basically your hard disk has been equipped with software improvements which occurs when the Bad Sector on the hard disk. This software can handle Bad Sector Logic. Here are some examples of software built from a number of hard disks. Maxtor and Quantum includes MaxBlast, Samsung with ClearHDD, armed with a Seagate Seagate format, while Western Digital Old DLG Diagnostic got, and equipped Fujitsu FJ-IDE Drive Initializer Utility.

But no rule you can also maximize the healing process of the hard disk Bad Sector using other software that is also quite powerful. And this time the software will try is SpinRite, hard disk repair software made by Gibson Research, the latest version of version 6.0. SpinRite supports FAT, NTFS, Linux, Novell, drives with multiple operating systems, and an unformatted hard disk though. Here's a bit of how to use them.



1. Create a boot CD or floppy disk. The manufacturing process can be performed directly in the SpinRite. Select the "Crete Boot Diskette", then "Create an ISO or Image File", or it could be through the option "Install SpinRite on Drive". To be more easy to apply for it using a bootable CD. As information, the next stage of the process will be more time consuming in DOS mode.



2. After the image file of SpinRite made had been so, then burn to a blank CD using Nero or similar CD burning device. Restart the computer and boot with the CD you just created.



3. After successfully booting from the CD before, we will be brought in the SpinRite interface that presents five options, or can be called also the level of improvement. Please select the option which you need to repair your hard disk according to the level of damage. Usually in most cases, option number two and four of the most frequently needed. second option will restore the data, and option number four is the maintenance and analysis on the hard disk.

4. After selecting the option which is required, you are welcome to specify the drive or partition which will be inspected or repaired. Follow the next step is the determination of the examination and SpinRite option will immediately work to do his job on your hard disk.










Processing time is relatively based on the speed and capacity of your hard disk. SpinRite is able to repair your hard disks with 120GB per hour maximum speed of it. Although the speed of SpinRite is still strongly influenced by many factors, such as system configuration, damage your hard disk, or the support of the Ultra DMA. But do not worry if you do not want to wait a long time and did not want to leave the repair process, SpinRite offers ease of termination of the repair process to proceed at a later time. Living simply keep track of position when stopping the process.

SpinRite will be automatically entered into option number four, when after checking need for repairs and maintenance on your hard disk. And this process also takes some time, get to a matter of days even, depending on the level of damage to the hard disk itself. But surely this is better than you have to lose data or have to buy a new hard drive thanks to the hard disk Bad Sector persecute you.

SpinRite also comes with a screensaver is active when the process is running. It could also show the process that is underway. If your hard disk supports temperature readings, SpinRite will also feature a hard disk temperature information. There are also other interesting feature is "DynaStat Data Recovery" which can display more closely the course of an ongoing improvement process.

Skype Runs In Background on the iPhone

Multitasking capabilities possessed by iOS4 operating system for applications that impact was laid. Call it Skype that utilize this feature.
Skype-for-iPhone

Skype application running on iOS4 has been upgraded to support full featured multitasking. So today, iPhone users running Skype, can receive calls and messages on the background while running other applications.

As quoted from Mashable, in addition to the development of multitasking support, graphics, latest Skype for the iPhone also developed to support the Retina Display in iPhone4. Previous development of Skype on the iPhone that is located on the support of the call through the 3G network or Wi-Fi. Thus, through 3G networks, there are no additional fees required to use the phone via Skype.

Skype continues to be developed to follow the latest features of the operating system and hardware used.

Virtual tape library implementation, and development

Virtual Tape Library as the rise in recent years, many backup disk (Backup to Disk) solutions, most importantly, it is changing the traditional pattern of market data backup and protection of user mode.

Virtual tape libraries to achieve three main ways

Currently on the market in accordance with different architecture virtual tape libraries, can be divided into three types: software-based backup (D2D), application server type (VTL Appliance), a special type of smart (Intelligent High preformance VTL) *

• backup software-based virtual tape library (s Ⅰ on behalf of the D2D)

Tape libraries direct simulation software is installed on the server backup, server backup several file system partition that emulates tape libraries, so the backup software to use a tape library system disk file.

Within the program, a backup disk exposed to the host operating system, basically, is still "online." At the user, the data line must remain secure. For example, if the backup server is unfortunately infected, the virus can be completely destroyed on-line data on the disk, whereas damage to the backup data on disk arrays.

In addition, the program takes the host resources, limited performance.

This program is more than by the backup management software as a functional module to offer relatively inexpensive. However, subject to the file system, then the application, I / O performance and data security has certain limitations.

Therefore, the program specifically for cache back up - which is the first backup to disk, then back to the server if not busy moving to a physical tape library.



• Application Server class virtual tape library program (Ⅱ generation)

This program is really another library virtual tape software program: through a virtual tape library management software is installed on a separate dedicated server (usually a PC server) where the server and disk storage devices connected to a simulation of a tape library.

In this way, a backup server or other applications via FC or SCSI host with a dedicated server connection, then a dedicated server and disk storage systems associated with the expression for virtual tape library (VTL).

And backup software-based virtual tape library program different is that the backup server, or application server to a dedicated server and disk array as a tape library, to achieve a virtual tape library device host and the separation of physical and logical devices. Under such a program hosted on a virtual tape library to read and write mode is the data block (Block-Level) to read and write, read and write than other types of backup software, fast, and will not be back-up data from the host side generated from the host and virus removal operation does not affect the backup data.

Within the program, the virtual tape media? Logical disk volumes, the sector is no longer format of the operating system, but together with naked and tape media ("raw disk"), last backup data is stored in sequence for Byte Byte, the physical layer to reach the disk read and write linear, and to prevent fragment file system problems, fully utilizing high-speed disk device I / O performance.

Lack of such programs need to use a PC with a certain ability to expand the server as a virtual tape library manager, optimize system is lower, while the control structure using a PC server, inefficient, PC other servers and disk arrays that are connected with the management is not uniform, not a single structure, but also prone to back-end PC servers and storage that are not compatible. It seem like the new technology has turn The straight library knocks the analogue.